Volume 4, Issue 1, March 2019, Page: 23-30
Deinking of Black Toner Ink from Laser Printed Paper by Using Anionic Surfactant
Mehari Abraha, Department of Chemical Engineering, School of Chemical and Bio Engineering, Addis Ababa University, Addis Ababa, Ethiopia
Zebene Kifle, Department of Chemical Engineering, School of Chemical and Bio Engineering, Addis Ababa University, Addis Ababa, Ethiopia
Received: Apr. 22, 2019;       Accepted: May 29, 2019;       Published: Jun. 13, 2019
DOI: 10.11648/j.cbe.20190401.15      View  136      Downloads  23
Abstract
The objective of this research was to synthesize natural anionic surfactant from renewable material and use of this surfactant for ink removal from printed paper via flotation deinking in paper recycling process. The work included the preparation of the castor seed raw material, extraction of castor oil, preparation of anionic surfactant and deinking flotation of waste printed paper. Foamability and foam stability, critical micelle concentration and hydrophilic lipophilic balance of the surfactant was characterized and used to evaluate its fundamental deinking ability properties for the purpose of deinking flotation. The hydrophilic-lipophilic balance (HLB) of the fatty acid soap of 19.48, average Foamability height of 49cm and critical micelle concentration (CMC) of 0.0065M was obtained. Lab scale flotation deinking process was done and the basic flotation parameters like flotation time, fatty acid soap dosage and pH were optimized for evaluating deinking efficiency. The flotation deinking efficiency was probed by measuring the residual ink concentration of the hand sheet via Perkin Elmer spectroscopy before and after deinking flotation. The individual and interaction effects between the basic parameters were studied by using design Expert Software 6.0.8. For the deinking flotation, the maximum ink removal efficiency was determined to be 78.02% at the flotation time of 90min, fatty acid soap dosage of 1.5% and pH of 9. Increasing flotation time from 30min up to 90 min and decreasing fatty acid dosage from 3% to 1.5% and increasing of pH from 3 up to 9 were found to have increased the ink removal efficiency.
Keywords
Anionic Surfactant, Waste Paper, Flotation Deinking, Hand Sheet, Effective Residual Ink Concentration
To cite this article
Mehari Abraha, Zebene Kifle, Deinking of Black Toner Ink from Laser Printed Paper by Using Anionic Surfactant, Chemical and Biomolecular Engineering. Vol. 4, No. 1, 2019, pp. 23-30. doi: 10.11648/j.cbe.20190401.15
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Temesgen. (2011). Microsoft Word - 90. Small Scale Paper Making. doc.
[2]
Turai L. D, Williams L. (1977). Tappi (Vols. (Vol. 60)., vol. 60,).
[3]
Blaint J. (1992). The Process of Flotation Deinking, 1992 Contaminant Problems and Strategies in Wmtepaper Recycling Seminar Proceedings:113-120. Cincinnati, Ohio.
[4]
RichardVenditti.(2002). LabManual:Handsheet Preparation. North Carolina State University:Department of Wood and Paper Science.
[5]
Carre B., Galland G., and Saint Amand F. J. ((February 1995)). “Estimation of Ink Detachment and Removal” Progress in Paper during Pulping and Kneading. TAPPI Recycling Symposium.
[6]
Biermann C. (1996). Handbook of Pulping and Papermaking ( Second Edition ed.). San Diego, CA: ACADEMIC PRESS
[7]
. Bobu E.; Ciolacu F.; Cretu A. (2008). Deinkability of mixed prints: alkaline vs. neutral deinking. Progress in Paper Recycling., 18 (1) 23-31
[8]
Chin Li, Kevin Hipolit, Bhima R. Vijayendran. (1994.). Deinking agent of nonionic surfactants. United States Patent Li et al.
[9]
Davide Beneventi1, Olivier Baudouin2 and Patrice Nortier1. (210). Semi-Empirical Modelling and Management of Flotation Deinking Banks by Process Simulation. France: INTECH opein science /open mind.
[10]
Dobias, B., Klar, W., Schwinger, K. (1992). Flotation of pigments and inks from waste paper. Innovations in Flotation Technology.
[11]
Dorris, G. M., and Nguyen. ( 1995). Flotation of model inks Part 11:Flexo ink dispersions with out fibers. f. Pulp and Paper Sci., (pp. 55- 62.).
[12]
DoshiM. R. (1995). Optical brighteners: do we really need them?”, Progress in Paper.
[13]
Ferguson, L., (1992a). De-inking Chemistry Part I., Tappi J. 75(7): 75- 83.
[14]
Krofta M, Wang LK., ( 1989). Total closing of paper mills with reclamation and deinking installa. Chelsea, MI: Lewis Publishers.
[15]
MAK N., (1993). Characteristics of Fatty Acid as an Effective Flotation Deinking Collecter. 2nd Research Forum on Recycling, CPPA:, 145-152.
[16]
Motson, H. (1999). “Nonionic surfactants. Cambridge: Karsoa, D. R., ed. The Royal Society.
[17]
PalaH M., Mota F., Gama M. (2005). Factors influencing MOW deinking: Laboratory scale studies. Elsevier.
[18]
Richardson, D. E., Mineely, J., Pettit, P. R., Ash, G. H., Harden, P. E., and Parsons, T. (1992). The environmental impact of de-inking. Appita.
[19]
Salager, J.- L. (2002). SURFACTANTS Types and Uses. Mérida-Venezuela: universidad de los andes.
[20]
Scheibel J. J. (2004). The evolution of anionic surfactant technology to meet the requirements of the laundry detergent industry., (pp. 319-328).
[21]
Sherbrooke, J. 2. (2001). Introduction to Stock Prep Refining. canada: Aikawa Fiber Technologies, 72 rue Queen.
[22]
ThompsonC. G. (1992). Recycled paper. In The Essential Guide (pp. 64-67). Cambridge, MA, USA: The MIT Press.
[23]
Zhao, Deng, Zhu. (2005). Roles of Surfactants in Flotation Deinking. Progress in Paper Recycling 14(1):41-45, November 2004.
Browse journals by subject